24/7 Emergency Fire Damage Cleanup in Washington, WA
The flames are out and the engines are gone, and you are left in the yard trying to work out the next move. One free call to Unify Fire Solutions connects you with a licensed and insured independent restoration contractor who works in your part of Washington, WA. Someone picks up at any hour, and dispatch begins before you hang up.
- A free referral line that answers 24/7, holidays included
- Independent local crews serving every corner of Washington, WA
- A written, line-item estimate before work starts
- Help lining up paperwork your insurance adjuster will ask for
One phone number for fire calls across Washington, WA
Unify Fire Solutions does not do restoration work. We run the dispatch desk that gets a qualified independent contractor headed your way.
Most people only deal with fire damage once in their lives, so nobody knows the order of operations. Who do you call first, the insurance company or a contractor? Can you go back inside? Who turns the power back on? Our dispatchers field these questions every day, from every part of Washington, WA, and we can usually point you in the right direction in a few minutes.
When you call +1-833-336-1630, a live dispatcher asks a short set of questions: the property type, whether the fire department has released the scene, whether there is standing water from the hoses, and whether the roof or windows are open to the weather. Your answers tell us which independent crew in our network fits the job and how quickly the first visit needs to happen.
The contractors we connect you with are licensed and insured independent businesses based in or near your community. They own their equipment, employ their own crews, write their own estimates and answer for their own work. Our job is the connection: getting a qualified local pro on the phone with you at 2 a.m. instead of leaving you to scroll through search results on a cracked phone screen.
Calling costs nothing, and the line is staffed 24/7, including weekends and holidays. From a single-family home to a rented duplex, a condo unit or a storefront, the routing works the same way anywhere in Washington, WA.
It helps to have a few details ready: the property address, your insurer's name, a claim number if you have one, and the fire department's incident number. Don't worry if you have none of it yet. Plenty of people call from a neighbor's porch with nothing but a phone, and the dispatcher will help you figure out what to gather next.
What independent Fire Damage Cleanup crews in Washington, WA do
A fire leaves three separate problems behind: charred materials, smoke residue that spreads through the whole building, and the water used to knock the fire down. Here is how the independent contractors in our network approach each one.
Emergency response and mitigation
Mitigation is the work of keeping the damage from spreading, and with fire it is a race against time. Soot is acidic. In a matter of hours it yellows plastics and vinyl, and after a day or two it can etch glass, pit chrome and permanently stain grout. Wet drywall and insulation from the hose lines can begin growing mold in 24 to 48 hours.
The contractor who arrives typically begins with a safety walk and then secures the structure. That often means boarding broken windows and doors with plywood, tarping holes in the roof, and setting temporary fencing if the property sits close to a sidewalk. Then the water: extraction units pull standing water from carpet and subfloor, and soaked carpet pad is generally cut out and bagged.
With the building stable, crews run HEPA air scrubbers to pull fine soot out of the air, sometimes under negative pressure so particles stay out of unaffected rooms. Dehumidifiers and air movers go in where moisture meters show wet framing or drywall.
- Boarding of windows, doors and openings in walls
- Tarps on the roof to keep weather off open framing
- Water extraction and tear-out of soaked materials
- HEPA air scrubbing plus moisture readings
Single-family homes and condo units
A house fire rarely stays in one room, even when the flames did. Smoke follows air pressure and temperature, which is why you find black rings around outlets in a bedroom at the far end of the hall, or soot lines on the carpet along the baseboards. A residential crew first maps how far the residue spread, room by room, before anyone touches a surface.
Dry soot from a fast, hot fire is powdery, so crews lift it with dry chemical sponges and HEPA vacuums. Wet smoke from a slow, smoldering fire is greasy and calls for alkaline detergents and far more hand work. Kitchen fires leave protein residue, a nearly invisible film that smells terrible and turns surfaces sticky. Each type takes a different chemistry, and using the wrong one can drive the stain deeper into paint or wood.
Burned materials come out until the crew reaches sound framing. Framing that is only blackened, not structurally weakened, is often cleaned with soda or dry ice blasting and then sealed with a shellac-based or pigmented sealing primer to lock in odor before new drywall goes up. It is fair to ask the crew which studs will stay and which will go, and to have that written into the estimate.
- Residue mapping and spot tests before any cleaning
- Targeted tear-out of burned drywall, insulation and trim
- Framing cleaned by blasting, then sealed
Commercial property, rentals and apartment buildings
When the property is a business or a rental, the questions multiply. A restaurant owner needs to know when the hood system can be inspected and the health inspector called back. A landlord needs to know which units are habitable and which tenants need temporary housing. A property manager with a fire in one unit of a fourplex has to stop smoke from moving through the shared attic and ducts.
Contractors who handle commercial work often phase the job so part of the space can keep operating. They build temporary poly containment walls with zip-door access, run negative air machines, and schedule the loudest demolition for nights or weekends. In a retail shop, the sales floor might reopen while the back room is still sealed off.
Stock and inventory are a separate issue. Smoke-exposed food, medication, cosmetics and anything in permeable packaging usually has to be discarded and documented for the claim. Ask the crew to photograph and list disposed inventory with quantities so your business interruption and property claims line up.
- Phased work plans that keep part of the space open
- Containment walls between damaged and occupied units
- Itemized disposal records for the insurance file
Apartment and condo buildings bring building code into play. Fire-rated assemblies, such as the drywall between units or around a stairwell, have to be rebuilt to the same rating, and damaged fire alarm or sprinkler components need a licensed trade to restore them. Ask the crew if those items are part of their estimate or will go to a separate trade.
Landlords and property managers: ask the contractor for a short written status note on each unit, habitable or not, so you can send it to tenants and your insurer the same day.
Contents, odor, HVAC and firefighting water
The smell is what most people remember afterward. It gets into clothes, mattresses, the couch, the kids' stuffed animals, and the inside of every closed drawer. Contents crews pack out what can be saved, inventory each box, and clean it off site, using ultrasonic tanks for hard items and specialty laundering for fabric. Electronics often go to a separate vendor who can clean the circuit boards before soot corrodes them.
Deodorization comes after the cleaning, not as a substitute for it. Crews may use thermal fogging, which mimics the heat of the fire to carry deodorizer into the same pores the smoke reached, or hydroxyl generators that can run while people are present. Ozone works well but the building has to be empty of people, pets and plants, so ask about it first.
If the HVAC system was running during the fire, the ductwork pulled smoke through every room it serves. A duct cleaning crew will inspect the air handler, coil and duct runs, clean or replace flex duct, and swap filters. Ask whether the contractor follows IICRC guidance, such as the S700 standard for fire and smoke and the S500 standard for the water side of the job.
- Pack-out, inventory and off-site contents cleaning
- Odor treatment by thermal fog, hydroxyl or ozone
- Inspection and cleaning of ducts, coil and air handler
Firefighting water is the part people underestimate. An engine can put hundreds of gallons into a building in a few minutes, and it runs down into wall cavities, under cabinets and through ceilings to the floor below. Because it carries soot and ash, it is contaminated, which is why soaked carpet, pad and insulation usually come out instead of being dried in place. Crews remove baseboards or drill small holes to ventilate wall cavities, then track readings until the framing returns to a normal dry level.
- Drying of wall cavities soaked by hose water
- Electronics sent to a specialist vendor
Just got the all-clear from the fire department?
Call the free line and a dispatcher will walk you through the next hour and start finding an independent crew near you.
Call +1-833-336-1630What a referral through Unify Fire Solutions looks like
We can't promise what a fire will cost or how long the rebuild takes. Here is what we can tell you plainly.
Written estimates up front
The independent contractor provides a written, line-item estimate before work starts, and you should always ask for one. Most crews in Washington, WA write estimates in the same software insurance adjusters use, which makes comparing the two much easier.
Fast dispatch, any hour
Someone answers 24/7, and dispatch begins as soon as you call. Arrival time depends on which crews are free and how far away they are, and it is often the same day.
Local crews across the state
Our network covers metro areas, suburbs and small towns throughout Washington, WA. You are matched with a crew that works near you and knows how the local building office and utilities run.
Licensed, insured independent pros
Every referral goes to a licensed and insured independent contractor. Still, verify the license and the certificate of insurance yourself before signing, and ask whether the crew follows IICRC S700 guidance.
A second option if you need one
If the first contractor turns out not to be the right fit, call us again and we'll connect you with someone else. Sometimes the schedule doesn't work, sometimes you want a second estimate for the adjuster, and sometimes it is simply a personality mismatch. That's fine.
Getting two estimates is common on larger fire jobs, and many adjusters welcome it. Make sure both estimates cover the same scope, line for line, so the comparison is fair.
A step-by-step guide after a fire
No two fires are alike, yet the sequence of decisions is remarkably similar anywhere in Washington, WA. Work through this list while a crew is on the way.
- 1
Get safe, then call
Stay out until the fire department tells you it's safe to return. Then call +1-833-336-1630, answer a few questions about the scene, the water and any openings, and a dispatcher will start finding a crew.
- 2
Arrival and site security
The independent contractor walks the property with you, photographs everything, and boards or tarps any openings. Where water is pooled, extraction frequently begins on the very first visit.
- 3
Written scope and estimate
You receive a written estimate, line by line, with mitigation split out from rebuild work. It goes to your adjuster, and only emergency stabilization should proceed before you sign.
- 4
Cleaning, drying and deodorizing
The crew tears out burned materials, dries the building, cleans soot from each surface, and deals with the odor. Daily moisture logs and photos give the adjuster a clear record of progress.
- 5
Rebuild and final walkthrough
Permitted repairs follow, from framing and electrical to drywall, paint and flooring. Before the final invoice, walk the property with the contractor and make a punch list of anything left undone.
The first hour, before any crew arrives: make sure every person and pet is out and accounted for. Do not re-enter until the fire department releases the scene, and never switch breakers on or off yourself after a fire. Write down the incident number the firefighters give you; your insurer will ask for it. If you can safely do so from outside, take wide photos and video of every side of the building.
When the fire department releases the scene
Until the fire department formally hands the property back, it's their scene. When investigators are still determining the cause, you could be kept out for several hours or, now and then, a few days.
After release, a local building official may post a placard on the door. A green tag generally means the building can be occupied, a yellow tag means limited entry, and a red tag means nobody goes in until the structure is evaluated. The placard system differs from one jurisdiction to the next in Washington, WA, so read the notice and call the number on it.
A red tag doesn't stop mitigation from the outside. Contractors can still board up, tarp the roof and fence the site, and many will coordinate with a structural engineer to get the tag lifted.
Utility shutoffs after a fire
Firefighters often cut power at the meter and close the gas valve during the fight. Once a utility has been shut off for a fire, the provider usually will not restore service until the system is inspected, and sometimes a licensed electrician or plumber must sign off first.
For that reason, restoration crews usually arrive with generators to power the scrubbers and dehumidifiers. Call your electric, gas and water providers yourself to report the fire and ask what they need to restore service.
If water service is still live and a line ruptured in the heat, close the main shutoff. You'll usually find it near the meter or where the supply enters the building.
How crews coordinate with adjusters
Report the loss to your insurer the same day and get a claim number. Nearly every policy expects you to prevent additional damage, and that is the purpose of emergency mitigation. You don't have to wait for the adjuster to approve boarding, tarping or drying, though you should keep every receipt.
Independent contractors across Washington, WA usually produce two separate invoices: one for mitigation (board-up, extraction, drying, soot cleanup) and one for restoration (rebuilding). Adjusters review each differently, so keeping them apart avoids delays. Ask the crew for time-stamped photos, daily drying logs and a contents list, and get a copy of whatever goes to the insurer.
If the home isn't livable, many policies include additional living expenses (sometimes called loss of use) for temporary housing, meals and similar costs. Limits vary from policy to policy, so ask your agent what applies and keep all receipts.
Building permits for fire repairs
Cleanup and mitigation work typically doesn't require a permit. Structural repairs, rewiring, new framing, a new roof and HVAC replacement nearly always require one. In Washington, WA, local city and county building departments issue permits, which means forms, fees and inspection timing differ by location.
An experienced local contractor will know the nearby office and will typically pull the permit under their own license. Make sure the permit is posted on site and that inspections are signed off before walls are closed up. Your insurer may ask for the final inspection record before releasing the last payment.
Older homes can raise extra questions once walls are open. When the house is old enough to have asbestos in ceiling texture, flooring or duct wrap, or lead paint, testing may be needed before tear-out. The repairs might also need to meet today's code instead of the original one, and some policies cover that under ordinance or law coverage, so ask your agent.
Landlord and tenant responsibilities
With a rental property, the structure and the renter's belongings typically fall under different policies. The landlord's policy generally covers the structure and the owner's fixtures, while a renter's policy covers the tenant's furniture, clothing and relocation costs.
Owners should put access, timelines and habitability decisions in writing for tenants. Tenants should photograph their own belongings before the pack-out and get a copy of the contractor's contents inventory. Landlord and tenant obligations after a fire are set by Washington, WA law and your lease, so check the lease and ask a local attorney or housing office if anything is unclear.
Either party can call the line. In most cases the owner signs for the building work and the tenant handles the contents claim, and one crew can do both if everyone agrees.
Reopening a small business after a fire
A shuttered business loses money every day, which makes fast mitigation even more important. Call your commercial insurer about business interruption coverage and document lost revenue from the first day.
Restaurants, salons, medical offices and food retailers will likely need a health or fire inspection before reopening. Have the contractor write a phased schedule that shows what has to be done ahead of each inspection.
Before the computers are moved, make sure your sales system, payroll and customer records are backed up. If you lease the space, notify the landlord right away, since the lease normally says who pays for which repairs.
Why 24 to 72 hours is the window: soot continues to etch finishes, wet building materials begin to grow mold, and smoke odor sinks further into porous surfaces every day. Getting mitigation going early is often the biggest factor in how much can be cleaned instead of thrown out.
Notes from people who called the line
Shared with permission. Names shortened for privacy.
The dryer vent caught at about eleven at night. By the time the fire department cleared us, I couldn't think straight. The dispatcher asked me five or six simple questions and told me to get the incident number before the engine left. The contractor was there the next morning, boarded the laundry room, and had extraction going before my adjuster even called back.
I have two duplexes I rent out, and one of my tenants had a stovetop fire. What helped most was the contractor keeping the mitigation bill separate from the rebuild estimate. My adjuster approved the first one within a week, and the tenant next door never had to move out because the crew sealed the shared wall and attic.
We rented our place and the fire started in the unit below us. I had no idea my renter's insurance covered a hotel until the dispatcher told me to ask my agent about it. The crew boxed up our clothes and the kids' toys and handed me a typed inventory, which made the claim much simpler.
My restaurant went dark on a Friday after a grease fire. The contractor set up plastic walls so we could get the dining room cleaned and inspected while they kept working on the kitchen. They gave me a written list of what had to be done before the health inspection, and we passed the first time.
The first company I was sent couldn't start for almost a week. I called back, said that wouldn't work, and the dispatcher connected me with a different crew who started the next day. No pushback and no runaround, which was exactly what I needed.
Fire damage questions from Washington, WA callers
How fast can a Fire Damage Cleanup technician arrive in Washington, WA?
We begin dispatching as soon as you call, and someone answers at any hour. How soon a crew arrives depends on which independent contractors are available and how far they are from your property. Across much of Washington, WA it is often the same day, and the dispatcher will give you a realistic picture before the call ends.
Do you provide upfront pricing?
Unify Fire Solutions doesn't set prices, because we don't do the work. The independent contractor provides a written, line-item estimate before work starts, and you should ask for one before signing anything. Emergency board-up or water extraction may begin right away to prevent more damage, but ask the crew to explain those charges in writing too.
What emergency services are available?
The crews we refer usually cover board-up, tarping, extraction of firefighting water, drying, soot removal, air scrubbing and deodorization. Many also offer contents pack-out and storage, HVAC and duct cleaning, and full rebuilding after the cleanup. Tell the dispatcher what you're seeing and we'll match you with a crew that does that work.
Do contractors in WA work directly with my insurance company?
Most independent crews in WA deal with adjusters every week. They build a file with photos, moisture logs and a line-item estimate, and with your OK they'll send it to the adjuster. Keep in mind the policy is between you and your insurer, so you make the final decisions and should keep copies of everything.
Do I need a permit for fire damage repairs in Washington, WA?
Cleaning and mitigation usually don't, but structural, electrical, roofing and HVAC repairs almost always do. Your city or county building department issues permits in Washington, WA, and the rules differ from place to place. In most cases the local contractor pulls the permit and books the inspections.
Can I stay in my house after a fire?
That depends on what the fire department and the local building official say, and whether power, water and heat can be safely restored. Even with a small fire, smoke residue and odor can make sleeping in the home unhealthy, especially for kids, older adults and anyone with asthma. Ask your insurer whether your policy includes additional living expenses for temporary housing.
Should I call my insurance company or a contractor first?
Do both the same day, in whichever order you can. Your policy almost certainly requires you to prevent further damage, so you don't have to wait for the adjuster before boarding up or removing water. Write down the claim number, save all receipts, and pass the number to the contractor so their documents line up.
What should I throw away after a fire?
Discard any food, medication or cosmetics exposed to heat, smoke or hose water. Before you toss anything else, photograph it and list it for the claim; the contractor can help decide what is salvageable. Many items that look ruined, like clothes, dishes and hard furniture, can often be cleaned.
Is it safe to clean up soot myself?
Scrubbing soot with a damp cloth tends to grind it into paint and fabric, and the residue can carry acids and fine particles that are bad to inhale. If you must go in for essentials, wear gloves and an N95 mask, and keep fans and the HVAC off. Let the crew handle cleanup, since they'll test the residue and pick the correct products.
Does Unify Fire Solutions serve every part of Washington, WA?
The network covers metro areas, suburbs and rural towns across Washington, WA. In remote areas the nearest crew may be farther away, so the dispatcher will be upfront about expected timing. Call +1-833-336-1630 with the property address and we'll let you know who can reach it.
Fire Damage Cleanup coverage throughout Washington, WA
A single number connects you with independent crews anywhere in Washington, WA, from crowded metro blocks to farmhouses on long rural roads.
In metro areas, there are usually several contractors within reach, so the dispatcher can match on specialty, like commercial kitchens or high-rise condos. In suburbs, crews tend to handle a lot of attached garage fires, dryer vent fires and kitchen fires in single-family homes. In rural Washington, WA the closest crew may drive farther and usually brings generators and trailers, since utilities can take longer to come back.
- Single-family homes
- Condos and townhouses
- Apartment buildings
- Rental duplexes
- Mobile and manufactured homes
- Restaurants
- Retail stores
- Offices
- Warehouses
- Churches and schools
- Detached garages
- Barns and outbuildings
Callers tell us about kitchen fires, clogged dryer vents, space heaters, wiring faults, candles, lightning, grills, garage fires, furnace puff-backs and fires that spread from next door. No matter how it started, the first call is the same.
If you are out of state when it happens, say at a rental property or a parent's home, you can still call. The dispatcher can work with a neighbor, tenant or manager who is on site, and the contractor can email you photos and the written estimate before anything past emergency stabilization starts.
